一种分析碳酸盐岩孔隙系统数字图像的新方法

碳酸盐岩的孔隙类型多，孔径变化范围大，孔隙系统结构复杂，研究难度大。长期以来，是利用光学显微镜法、毛细管压力分析法、岩石孔隙系统复制法和图像分析仪法等方法或其中几种方法配合来研究碳酸盐岩孔隙系统。随着计算机图像技术的迅速发展和日益完善，借助该项技术通过碳酸盐岩孔隙系统数字图像来研究碳酸盐岩孔隙系统已经成为现实。文章提出一种研究碳酸盐岩孔隙系统数字图像的新方法。通过样品光薄片的光学显微镜（OM）数字图像和环境扫描电子显微镜（ESEM）数字图像二值化识别孔隙；构造孔隙度、孔隙贡献率和孔隙形状参数的计算公式用于数字图像分析，得到孔隙大小分布和孔隙形状分布。在此基础上，总结碳酸盐岩孔隙参数对其渗透率的控制作用。与传统的孔隙系统研究方法相比，该方法与计算机图像技术紧密结合，具有定量、快速的明显优势。     

地震勘探测量数据处理的全面解决方案

本文针对近年来地震勘探技术的发展对测量工作提出的新要求，分析了SSOffiee软件解决问题的方案和技术特色，最后提出了SSOffice软件的发展方向。     

我国炼油石化产业应对石油短缺时代的科技对策思考

分析了我国石油消费的增长趋势和石油的增产潜力，指出持续增长的需求和相对稳定的产量使我国对国际石油的依存度越来越高。综合了国际能源机构、能源经济学家和石油地质学家对世界石油供应前景的预测结果，认为世界石油短缺的时代并不遥远。提出了我国炼油石化产业应对世界石油供应短缺时代的科技对策：（I）抓紧开发和完善充分利用石油资源生产运输燃料和石化原料技术；（2）开发用煤炭、石油焦、沥青制氢和炼油过程耦合的廉价氢源技术和用氢优化技术；（3）开发炼油石化过程节能降耗技术；（4）开发天然气及煤制油、甲醇制乙烯、丙烯技术；（5）开发利用生物质生产车用替代燃料、生物材料和生物化学品技术。     

Breaking a remote user authentication scheme for multi-server architecture

Lin et al., (2003) proposed a remote user authentication scheme for multi-server architecture. In this paper, we breaks this scheme by giving an attack. Our attack allows an adversary to impersonate any user in the system, as long as a single authentication message of that user is observed.     

EBSP study of the annealing behavior of aluminum deformed by equal channel angular processing

Commercial purity aluminum (99.5%) was fabricated by equal channel angular pressing (ECAP) up to total accumulated strains of approx. 10. The annealing behavior of material deformed to total strains of approx. 1 and 10 was investigated, using heat treatments of 2 h at various temperatures from 100 to 500 °C. The microstructure of the annealed materials was characterized using the electron back-scatter pattern technique. A number of parameters were determined including the distribution and average values of both the boundary spacings and misorientations. For samples deformed to a total strain of 1, annealing resulted in discontinuous recrystallization. For samples deformed to a total strain of 10, annealing resulted in microstructures exhibiting characteristics of both uniform coarsening and, in a number of places, of discontinuous recrystallization. An attempt was made, based on the boundary spacing distributions, to separate these two components. The grain size after annealing was still however small, being just 6.4 μm after 2 h at 300 °C.     

Application of an anisotropic perfectly matched layer absorber for open boundary truncation in the multiresolution time domain scheme

We apply an anisotropic perfectly matched layer (APML) absorber for open boundary truncation in implementation of the multiresolution time domain (MRTD) scheme. We develop an APML update algorithm to handle a general APML region in the MRTD formulations with the content of the leapfrog algorithm applied in the conventional finite-difference time-domain method. We also discuss the boundary truncations for both perfectly electric conductor (PEC) and perfectly magnetic conductor (PMC) walls using the image techniques. We validate the algorithm by analyzing various guided wave and antenna structures. It is found that the APML performs well for absorbing electromagnetic waves in the MRTD algorithm.     

大幅扫描仪预视图像的高效显示研究

与普通扫描仪相比,大幅面扫描仪处理的图像面积、数据量大.为提高大幅面扫描仪软件界面中的图像显示效果和程序运行速度,提出了使用内存环境(Memory-device context)对图像进行预处理,消除了人机交互中预视图像的闪烁,通过对预视区域图像映射方法的改进减少了处理时间.     

移动通信系统"单通"故障浅析

重点分析了移动通信系统中,无线及交换系统内语音单通故障的成因；并以朗讯 CDMA 交换系统为例,提出语音系统优化建议；最后结合运维工作,阐述单通故障的处理流程与几种有效处理思路及工具。     

基于素性检验思想的不可约多项式判断

论文将Fermat素性检验的思想运用于不可约多项式的判断,给出了一个对于不可约判断问题的Monte Carlo 算法,分析了该算法的计算复杂度问题,并且给出了次数在200以内的检验结果。     

Acquisition and pattern recognition of spectrum information of welding metal transfer

With the creation of a pattern recognition system for metal transfer mode, this article has collected five kinds of spectrum signals in gas metal arc welding (MIG, MAG and CO₂) and take them as training samples. These samples have been pretreated by computer, several key characteristic parameters of the spectrum signal have been creatively extracted, and a corresponding recognition function and a minimum-distance-classifier have been constructed. The results show that the pattern recognition of several kinds of metal transfer modes for the metal gas arc welding can be done successfully, and relative important parameters in welding process, such as the frequency of droplet transfer and the approximate diameter of each droplet, can also be obtained.